PE553 |
High Density Polyethylene |
Suggested
Applications: |
Open head pails, shipping
containers, household goods, crates and closures with good
toughness |
Characteristics:(1) |
Good stiffness, excellent
impact strength, good warp resistance |
ASTM D1248
Classification: |
Type III, Class A,
Category 3 |
Properties |
Typical
Values |
Unit |
ASTM
Method |
|
|
|
|
Density |
0.952-0.955 |
|
g/cc |
|
D 1505 |
Melt
Index |
4.5-6.0 |
|
g/10
min |
|
D 1238 |
ESCR
(3) |
20 |
|
F50 h,
Cond. A |
|
D 1693 |
Tensile
at Yield |
4300
(30) |
|
psi (MPa) |
|
D 638 |
Elongation |
>
400 |
|
% |
|
D 638 |
Flexural
Modulus |
210,000
(1450) |
|
psi (MPa) |
|
D 790 |
Recommended
Processing Temperature |
425-525
(218-274) |
|
°F
(°C) |
|
- |
|
|
|
|
|
|
(1) All
resins meet Food and Drug Administration Regulation 177.1520
for food packaging at temperatures not exceeding 212°F
(100°C). |
(2) Data
developed under laboratory conditions and are not to be
used as specification, maximum or minimum. |
(3) Environmental
Stress Crack Resistance. |
Toler Chemicals, Inc. makes no representations or warranties and there are no conditions with respect to the accuracy, reliability or application of the information herein, its products or the safety or suitability thereof, or results obtained, whether expressed or implied including, without limitation, any implied warranty of merchantability or fitness of a particular purpose. Buyers and users must determine the results to be obtained for the application of the information herein and the safety and suitability of Toler Chemicals' products for their own purposes, and assume all risk, responsibility, and liability for all injuries, losses, or damages arising from the application of the information herein or use of Toler Chemicals' products, whether or not occasioned by Toler Chemicals' negligence or based on strict product liability. Toler Chemicals, Inc. neither assumes nor authorizes any person to assume for it any liability in connection with the use of the information herein or its products.
|
